Cromapol is a fibre reinforced liquid acrylic resin dispersed in solvent designed to prevent the ingress of water. Due to the high level of fibres in Cromapol the coating will bridge small gaps and require only a one-coat application to give instant waterproofing.
Application
• Clean all debris to ensure a dust-free surface. All moss and lichen must be removed using AlphaChem Fungicidal Wash, ensuring all corners and gutters are clean and free from plant growth.
• Ensure the area to be repaired is free from standing water, make good all cracks, splits, small holes and flashings prior to application. Gap or expansion joints greater than 3mm must be covered using Glass‐Fibre scrim and Cromapol. This must be carried out prior to full coating.
• Cromapol will tolerate damp surfaces although as with any application for best results, Cromar recommends applying to a dry surface.
• Cromapol is easily applied using a brush, roller or squeegee.
• These application instructions are for guidance only and do not constitute any warranty for product performance.
Note.
Due to the nature of the product, the brush used for the application cannot be cleaned and should be discarded after use.